Trestle Benches
Single Tier
Box section support frame with 1 Lower shelf. The Frame supports either a made to measure worktop of a larger kitchen design Or as a standalone table. Edged according to requirements.
Two Tier
Box section support frame with 2 Lower shelf. The Frame supports either a made to measure worktop of a larger kitchen design Or as a standalone table. Edged according to requirements.
Centre Prep
Worktop “Edge details” can be confirmed by referring to theEDGE DETAIL pdf supplied here:
EDGE SPECS
Technical Specifications
- Stainless Steel
1.5mm thickness - 304 grade stainless steel - 18% Chromium & 20% Nickel – Corrosion Resistent. - Fabrication
240S grit stainless steel - Silicon enhanced finish.
Fabrication subject to +/- 3mm tolerance. - Supplied Legs
Supplied Standard with 30mm x 30mm Stainless Steel box section Leg support.
Adjustable for levelling OR supplied with Locking / non-locking Castors. - Height
No standard - Nominal industry standards of 870mm high allowing for a 40mm worktop.
Lower or Higher heights to suit disabled or impaired access. - Width
No standard - Min 250mm / Max 2900mm for seamless shelf’s - Priced to bespoke sizes - Depth
Made to requested dimensions but can be between 300mm - 1000mm deep
(Max 1200mm deep for Center Prep) - H Frame
Support Legs with adjustable feet can compliment these trestles to allow for complete voids for under counter bins or appliances. - Under shelf
Can be same depth of the worktops OR can be cut short in depth by an agreed amount to allow for required service void to rear wall. - Under-slung Draws
Can be supplied with single or multiple “Under slung” draws conforming to gastronome trays on request. Locks can be fitted to the draws if required.